The proven 20K SuperGlide with 14" of automatic slide. Gear-driven latch provides an ultra-tight .030" king pin connection.
Requires a Quick Connect Capture Plate
This hitch requires a capture plate matched to your trailer's king pin box, sold separately. You must select the correct capture plate for your specific trailer brand.
Find Your Capture Plate
The SuperGlide is PullRite's flagship fifth wheel hitch and the only fully automatic sliding hitch on the market. Engineered specifically for short bed trucks, SuperGlide eliminates the cab clearance problem that plagues every short bed owner towing a fifth wheel trailer. There are no levers to throw, no switches to flip, and no getting in and out of the truck before and after every turn. Just get in and drive.
During turns and backing maneuvers, the SuperGlide's patented cam-action system automatically moves your trailer away from the cab along its rails, then returns it to the towing position when you straighten out. The result is a full 90-degree turning capability that other hitches simply cannot match. Manual slide hitches require you to stop, exit the vehicle, engage a lever, make your turn, stop again, and re-engage. SuperGlide does all of this in real time, without you lifting a finger.
Every SuperGlide is built around PullRite's patented fully automatic locking jaw — the only self-locking handle on the market. There are no secondary locking devices to manually engage, which means no reaching over high-sided truck beds. The precision, laser-cut jaw components cradle the trailer's king pin at 140 degrees for a secure, tight-fitting 320 degrees of connection. The dual-articulating hitch head moves side-to-side and front-to-back, delivering a smoother ride over uneven roads and allowing you to couple and uncouple on uneven ground without jacking or shimming.
The hitch head is easily removable with pins and clips — no tools required — reducing the lifting weight by 40 lbs. or more. An adjustable tension bolt prevents bumping or chucking during travel. A Capture Plate (sold separately) is required to activate the sliding cam arm and is attached to your trailer's skid plate.
Every SuperGlide is SAE J2638 tested, accurately weight rated, and manufactured in the USA from high-quality American steel.
The #4400 SuperGlide is the flagship Traditional Series model, rated at 20,000 lbs. gross trailer weight. It moves up to 14 inches during turns, 50% farther than manually adjusted slider designs, and operates fully automatically going forward or backing up.
The gear-driven latch design minimizes bump during towing by allowing only .030 inches of clearance between the king pin and latch, delivering one of the tightest connections in the industry. Available with a choice of mounting styles: fixed base rails with universal mounting brackets for lower cost, or totally removable SuperRails featuring Clean Bed Technology with vehicle-specific brackets.
A Capture Plate is required to activate the sliding cam arm and is sold separately.
Pick your truck and bed setup — we'll confirm fitment instantly.
Pick year, make, model, bed length, and bed prep — about 30 seconds. No need to leave the page.
These accessories are required for proper installation and operation.
Optional add-ons that unlock new use cases — not required, but worth knowing about.
Join thousands of fifth wheel owners who trust PullRite.
